Xmas Countdown: Day 15+2
Friday, December 9, 2011 | 7:00 AM
Share
Comment
Email
PrintCheck out what we have in store for day 15+2 of the Xmas Coutdown presented by O'Neal.
Classick Pant
- Constructed using a strong yet very light nylon thread, which ensures extreme durability and light weight
- A rider’s butt and inner thighs are prone to serve abrasion and wear while riding. Our use of super-strong Kodra 600 Denier material here makes this a non-issue
- Articulated 360-degree knee design. Multi-directional flex, 1680 Denier ballistics construction for durability and maximum abrasion protection, hand-formed and hand-cut padding, and plenty of room for a knee brace add up to the trickiest pant knee in all of motocross
- Air Line System (ALS) air intake vents are positioned mid-thigh (so they’re not blocked by knee braces) and feature a venturi effect for positive cooling when in motion and while stopped
- The liner of many MX pants runs only from the waist to knee. Our soft and moisture wicking mesh liner runs from waist to ankle, and is stitch-secured in key areas so it stays put whether you’re riding or pulling ‘em off after a hot moto
- High-back waist benefits include a more secure fit at the waist, improved jersey retention, adjustable lower-back support and low-spine impact protection thanks to a 10mm thick pad
- Cinch strap adjustable waist closure for a perfect fit every time or additional low-back support via the High-Back design, just grab the hook-and-loop secured strap on each side of the waist and tighten to taste
- Stretchy, JT-logoed stretch panels run down the outside of each leg and in strategic butt areas for optimum flexibility and secure fit
- Vinyl is old school, but it remains a perfect logo material and much better than heavy molded rubber. Vinyl is flexible, durable and very light which makes our pants as light as possible
- Straight leg fit. MX riders stand most of the time (or should), so the Classick is cut to reflect that. The result is more comfort and better fit
Available in: Blue/Red, Blue/Yellow, Green/Blue, Orange/Blue, White/Blue, White/Orange, White/Pink, Yellow/Black
Pant: $169
Life-Line Glove
- Soft and ventilated dimple mesh honeycomb fabric is both strong and breathable, and provides a solid foundation for padding, venting and armor
- Custom forged high-density PVC based lightweight armor is integrated on the back of hand and knuckle areas for maximum protection and flexibility
- Flexible TPR wrist closure with hook-and-loop strap for secure fit
- Sticky fingertip silicone print offers a high degree of grip and lever control
- Perforated Neoprene cuff offers comfort and a snug, no-fuss fit
- Contour shaped double layer Clarino palm design from heel of hand to mid-finger offers substantial palm protection and plenty of no bind flexibility
- Contoured Clarino thumb section with silicone with silicone gel padding protects thumb from impacts and blisters
- An easy to reach pull tab featuring a silicone print end for a secure grip allows easy on/off
- Clarino wrapped fingers incorporate small vent holes for maximum breathability
- Lycra stretch panel along outer edge of glove offers a secure, flexible fit
Available in: Blue/Red, Blue/Yellow, Green/Blue, Orange/Blue, White/Blue, White/Orange, White/Pink, Yellow/Black
Glove: $34.99
Pro-Tour Jersey
- Sturdy nylon construction
- Mesh collar offers maximum airflow and comfort with a neck brace or without
- Vented mesh side panels keep you cool under pressure
- Shoulder and elbow padding provides extra protection and comfort
- Pro fit tapered design contours to rider’s body in riding position
- Features a drop-tail cut with a grippy silicone print to keep your jersey tucked in
- Old school logo (with chrome fill) and racing stripe graphics. The overall design is clean and classic, with plenty of room for sponsor logos
Available in: Blue/Red, Blue/Yellow, Green/Blue, Orange/Blue, White/Blue, White/Orange, White/Pink, Yellow/Black
Jersey: $49
ALS-02 Helmet
- Hand-laid Fiberglass Shell - Fiberglass is an optimal shell material due to its energy absorbing properties
- Molded EPS Liner - Combined with the fiberglass shell, gives the ALS-02 maximum protection
- Air Line System venting - JT Racing's next-generation ALS helmet venting technology uses 11 intake and exit vents - and multiple air channels within the EPS liner - to move tremendous amounts of air into, through, and out of the helmet, especially in the lower rear section, an area notoriously hard to cool
- 3 Shell Sizes - JT Racing uses three shell sizes to give each individual size an optimum liner shape for maximum comfort and fit. A wide, tall eye port accepts many goggle designs too
- Anatomical Cheek Pads - Each cheek pad is molded to the shape of a face for optimal comfort and fit
- Removable, Washable Comfort Liner - Hydra-Wick comfort liner wicks moisture and sweat from the head and is easily removable for washing
Available in: Blue/Red, Blue/Yellow, Green/Blue, Orange/Blue, White/Blue, White/Orange, White/Pink, Yellow/Black
Helmet: $329
In stores now, and jtracingusa.com
Share this article:
Did you like this article?
Check out LAST NIGHT
in our Latest issue of Racer X available now.
Ryan Villopoto may have locked up his 450SX title a week early, but the 2013 Monster Energy Supercross Championship finale still had drama and excitement to spare. Page 124.
Look for the verified symbol 
Impulse Studios
Did someone screw up JT Racing in an Oneil promotion?????
Wild and innovative! NOT!!!! Did someone have a trust account and decided to revive the best gear company of all time and forget something???? It has to look good! I feel like I'm in a Brady Bunch sequel. Even in the 90's JT gear looked good. The only thing this gear goes with is some Johnny O boot gators...